What showed under Gargoyle / OpenWRT - that's good! WZR-HP-G300NH - you should see a different light pattern than The web browser - just leave the computer for 10 minutes.Īfter 10 minutes, close the browser and visually check the WAIT 10-15 minutes - LEAVE the router alone and do NOT close Once you upload it - it will come back with an MD5 checksumĪnd it will say its ready to flash - so hit ok/start and now Goto the Admin tab and choose to upgrade firmware, and nowĬhoose the DD-WRT MULTI file that you hex-edited. You may have to renew DHCP if you changed default settings.Īfter 5 mins - logon to 192.168.1.1 in a browserĭefault logon is root - password is blank - login Sysupgrade file - flash it and wait for about 5 mins Open up the Gargoyle GUI - flash the OpenWRT 10.03.1-rc4 WAN cable from the router - just have a LAN hookup. Once you have those 2 files downloaded - disconnect the Remove the first 28 bytes and have these 4 bytes at the start: Information on how to edit the DD-WRT bin file so that you Openwrt-ar71xx-wzr-hp-g300nh-squashfs-sysupgrade.binĭownload #2 - Get one of the latest DD-WRT - MULTI imagesįor the WZR-HP-G300NH - and you have to hex-edit it. It involves a few steps and a few downloads. Some people have asked about this so I tried it myself.
0 Comments
Leave a Reply. |